Bike Equipment

The quintessential bikepacking bag for the great outdoors. Perfect for bikepacking trips in the wilderness and carrying layers for all-day rides. Designed to hold light, compressible clothes and gear on off-road rides, the seat bag provides a spacious compartment under the saddle, eliminating the need for a rear rack. It's held securely by a stable three-point attachment system, ensuring maximum comfort and dropper post compatibility. The all-weather fabrics offer unparalleled resistance to abrasion and tears, and it's also simple to pack down. - Abrasion-resistant panels for protection - Roll-down closure for adjustable capacity - Reinforced structure for increased riding stability - Reflective graphics and light attachment point for increased visibility - Hard-wearing, all-weather Dimension-Polyant VX21 - Compatible with dropper posts when using adapter - 377g

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Designed and manufactured by PEMBREE in the UK with the strictest environmental standards, the PEMBREE the D2A pedal is totally carbon neutral. PEMBREE components are hand-crafted and fully made in England. All components, from the aluminium all the way to the bearings, are sustainably sourced and easily recyclable. PEMBREE D2A is designed as the ultimate racer's flat pedal. Balancing perfectly between traction, strength and weight. Riders of the D2A benefit from unrivaled grip via PEMBREE designed and manufactured Traction Pins, the strength of a stainless-steel spindle and premium bearings. - Spindle: Stainless Steel - Pedal Body: Aluminium - Traction Pins: Stainless Steel - End Cap: Aluminium - Inner Bearings: IGUS JSM - Outer Bearings: Sealed Ball Bearings - Pins: 10 Traction Pins per side - Body Dimensions: 100mm x 110mm x 15mm (centre) - Weight: 446g - Warranty: 5 years, 2 years bearings

Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders

The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)

- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm

- The seat bag alternative - Stash your stuff at a lower center of gravity - Two convenient size options, small or large

- Rubber straps - Fit Raceblade, Mud-x - Set of 8

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

- Plastic nylon molded body - Chromoly spindle - 318g pair

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

An easy-to-install fender for blocking tire spray and protecting fork stanchions in sloppy conditions. So fast and so clean The Bontrager Enduro Front Fender keeps menacing tire spray away while also protecting your fork stanchions from trail splatter. This durable, flexible poly fender has you and your bike covered when the trail gets sloppy. Installation is quick and easy, and the reversible design offers graphic options for bonus styles, free of charge. Product details - Quick and easy attachment installs to most forks in seconds - Easy installation with four attachment locations (attachment zip ties not included) - Multiple mounting eyelets for easy adjustment and compatibility for most forks and tire widths - Flexible 1mm poly material is durable and can be easily cleaned - Reversible design offers two graphic options - Recyclable polypropylene material

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included