Parts & Accessories

Get unbelievable traction in even the slickest winter conditions by adding Bontrager Tire Studs to your stud-ready winter tires. The carbide tipped design provides biting traction with an easy to install, durable design. Key features - Carbide-tipped design provides long lasting and durable traction - Compatible with Bontrager stud-ready tires - Use Bontrager Tire Stud Tool for easy installation

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve. - Made from CNC machined from 6061 T-6 aluminum, anodized black - Tapered rubber collar permanently bonded at the sealing interface - The valve core can be removed to add tire sealant - Valve locknut with o-ring seal and valve cap are included - Sold as a set

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

Tyreinvader is an anti-pinch-flat insert for tubeless tires. Very simple to use and light, it saves your tires and rims from hard impacts without interfering with the way your wheels behave. - Very light weight and high durability - Premium material (high density EVA) absorbs shocks but not sealant - Can be easily adapted to common wheel diameters - No need for specific tubeless valves Size: - 35: Rim external width 18-25mm - 40: Rim external width 20-25mm - 50: Rim external width 22-28mm - 55: Rim external width 27-35mm - 60: Rim external width 34-50mm

Grenade style Schrader Valve caps

- Snap-On high-Pressure plasticized nylon protects tube from abrasion - Older stock is yellow, New stock is black with halo logos

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Surly Rim Strips have one job and they do it well. The 58mm nylon rim strip is purpose-built for the Clown Royal Rim, and Moonlander bike.

- Individual vulcanizing patches in bulk - Cement and sandpaper sold separately

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

The FlatAway tire liner is a lightweight strip of Aramid fiber that protects against external punctures. It is excellent for touring or urban applications. Place it between your casing and your tube and ride with more security. - Adhesive backing holds FlatAway in place

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

Laugh in the face of punctures with Muc-Off's super lightweight inner tube sealant! The No Puncture Hassle Inner Tube Sealant is easy-to-install, and the cutting edge molecules seal holes in tubes of up to 4mm, ensuring that your ride is uninterrupted. - Proprietary water-based non-hazardous formula developed specifically for use with inner tubes - Compatible with a wide range of tube sizes and bikes - suitable for commuter, folding, urban, touring, MTB and e-bikes - Works on multiple punctures - Lasts the life of the inner tube/tire - Contains cutting-edge molecules to help seal holes quickly and effectively; seals holes in tubes up to 4mm

A ride-saving tool that’s hidden in your bar-ends. Don’t let pesky punctures ruin all the fun! When a puncture strikes just too big and gnarly to seal, the Muc-Off Stealth Tubeless Puncture Plug ultimate backup tool that’s cleverly stored inside your bar ends! The expanding silica plugs included cover most MTB, road, and gravel handlebar sizes, and the premium CNC Machined Aluminium bar ends are available in 10 anodized colors to match your ride. Each lightweight and durable set contains everything you need to get back riding when you’re stuck battling a hole that’s just not sealing: a stainless steel 2-in-1 puncture plug reamer tool, a variety of different sized tire worms, and a trimming knife. HIGHLIGHTS: - Screws into bars using just a 4mm Allen key - Plugs and repairs multiple holes that won’t seal with just sealant - CNC Machined from 6061 Aluminum. - Expanding silica plug fits most MTB, Gravel & Road Handlebars with a larger than 17mm inside diameter. - Supplied with 17mm, 19mm, and 21mm silica plugs to fit different handlebar diameters - Compatible with most open-end grips and drops bars with an 84mm straight section at the bar end. - Dimensions 89 x 27 x 27mm - Weight: 33g per side (excluding tire worms) WHAT'S INCLUDED: - Supplied as a pair - 1 x Stainless steel 2-in-1 puncture plug/reamer tool - 1 x knife trimming tool - Supplied with 5 x thin tyre worms, 5 x medium tyre worms & 5 x thick tire worms

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

Extremely light tubeless repair tool is entirely CNC machined. - Knurled aluminum shell for improved grip - O-rings on each side to keep it clean and dry - Reamer tip on one side and split needle tip on the other - Includes 8 bacon strips - 25g total weight

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

CNC machined all-in-one tubeless tire repair kit solution. - Co2 inflator for bike tires, valve core remover, repair strip plugs, and a tire insertion fork - O-rings on each side to keep it clean and dry - Includes 4 bacon strips - 30g total weight

Simple and effective design for clean and clog-free sealant injection. - 2 oz injector with highly bendable top hose and rigid bottom hose - Valve core tool included (Presta and Schrader valves) - Compatible with a wide variety of sealants