Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Rigid

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$387.00 - $427.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$542.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience. - Material: Carbon - Weight: 520g - Steer Tube Length: 350mm - Rake: 50mm - Axle To Crown: 395mm - Max Rotor Size: 140mm – 160mm - Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch - Crown Race Diameter: 1.5-inch - Torque Spec - Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
$110.49
Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.
$149.99
- Chromoly steel BMX style forks - Perfect replacement for modern BMX-inspired wheelie bikes - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Material: Chromoly - Race Diameter: 30mm - Axle: 3/8-inch
$169.99
- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake
$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too. Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2". Specifications: - Axle-to-crown: 420mm - Offset: 50mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders) - Weight: 2.75 lb.
$130.00
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire
$134.99
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
$130.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs
$59.99
- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm
$65.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels
$179.99
- Tange Infinity CrMo steel unicrown fork for 26 MTB wheels - Suspension corrected for 80mm travel 26 frames 40mm rake - All have 51mm International Standard disc mount
$299.99
Genuine replacement parts Get back on the road with a genuine replacement fork The fork you need. - Original equipment replacement forks for Trek Super Commuter+ eBikes - Color matched for direct compatibility - Uses 100x15mm thru axle (not included) - 307mm Steerer Length - 45mm Rake
$49.99
- Cantilever brake mounts - High-tensile steel construction - Threadless fork - Steerer diameter: 1 1/8-inch - Steerer length: 260mm - For bikes with 26-inch wheels
$625.00
A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance
$319.99
The MCX TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.0" tires and 27.5" x 2.1" tires. Extra long 350mm steerers fit most 62+cm frames NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (The MCX also comes in a configuration for standard QR hubs. There is an MCX Max model that is burlier with a tapered steerer, thru-axle, and even more tire clearance) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Brake mount: Flat mount disc – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8" x 350mm – Weight: 870g (Including thru-axle and uncut steerer) – Matte Black and limited edition Moss Green to match the Soma Wolverine B-Type frame
$99.99
- Hi-Tensile steel construction - 135mm fat tire front hub spacing - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Steerer Length: 275mm - Brake Mount: Is Disc - Rake: 45mm - Axle-to-Crown: 450mm - Race Diameter: 30mm - Axle: QR 9mm
$89.99
• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork
$49.99
- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 200mm - Brake Mount: Caliper - Axle-to-Crown: 395mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 100mm
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
$542.00
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig. - Material: Carbon - Weight: 748g - Steer Tube length: 350mm - Rake: 42mm, 51mm (adjustable) - Axle To Crown: 488.8mm - Max Rotor Size: 160mm - 203mm - Max Tire Clearance: 5.2-inch - Crown Race Diameter: 1.5-inch - Torque Spec – Steer Tube: 5.5Nm - Torque Spec - Axle: 8Nm
$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g
$174.99 - $209.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
Page 1 of 5 Next page